Second Life of a Lamp Table

This table has been a little pet project of mine, and I am so glad to finally have it finished.  It kept being put off, as there  were more important things to work on.  It came into our shop about 12 years ago and the customer decided not to have the work done and abandoned it.  After eyeing it for  years, I finally decided it was (potentially) to beautiful to sit lonely on our shelves any longer.  It needed a lot of work.  The first thing we did was strip it so any remaining finish or accumulated junk was gone.  I then completely dis-assembled it, sanded it with 120 and 180 and then it was ready for repairs. The old top was so badly warped that I ended up cutting a new one instead of trying to fix the old.  I was able to keep the raised edge pieces, but all the corners had to be cleaned up.

The new top received a redwood burl veneer treatment with a band of walnut around the outside edge.  Once the table was re-assebled,  we attached new beading around the top edge, as the old had pretty much disintegrated.  So there is old beading on the legs and the bottom edge, and new beading on the top.  Not ideal, but there was no other way.

For a stain I chose to use a 'natural' (or clear) stain on the redwood/walnut top and a teak stain on the rest.  This helped to balance out the color between the 3 different kinds of woods.  The color is really beautiful and vibrant.  The burl veneer needed a pore fill treatment to smooth it out a bit and fill in the voids, and that treatment actually helped to bring the grain out even further, which is of course a plus!  The beading is highlighted with a Van Dyke brown glaze and a water based Semi-Gloss finish was applied overall.   The table looks gorgeous, I am so pleased with how it turned out.  Now instead of sitting lonely and broken on a shelf it can stand proudly in the finest living room.

Duncan Phyfe, An Old Design, with a Built-In Flaw

 The Duncan Phyfe table design is a beautiful, graceful design that first originated about 1795.  With it's sweeping Egyptian lines,  Greek Lyre Motifs and graceful Urn Pedestals,  the style perfectly accentuated the era's interest in all things ancient.  The style died out about 1830 and was nonexistent for about 100 years.  Then in about 1930 there was once again a great interest in the Duncan Phyfe design and it went through a great revival.  It is now 70 years since that revival.  Modern replicas are still being made and sold in stores today.

We often get these classically styled pieces in our shop, and usually they all come to us for the same reason.  The sweeping curved legs aren't the most sturdy design and they tend to break off just after they join with the pedestal.  We actually have two such tables with just such repairs needed, sitting in our office right now, and we have another table in our 'completed' racks that just had the same kind of repair done.

The reason this design breaks so consistently in the same area,  is that since the leg is cut into a curve,  the grain runs across it in some areas, instead of up and down.  A normal, vertical grain line is much sturdy and less likely to break.  the cross grain line of a Duncan Phyfe leg is more susceptible to pressure and can snap.

The good thing is,  we have all the tricks and tools to get these legs back together, looking as good as new, and just as sturdy,  if not more sturdy then before the break.  If you have one of these lovely pieces,  which has it's own crack or break,  bring it to us.  We would be happy to restore it to it's former glory.